TechniDrill Gundrilling Machine Perfect for Aerospace Applications

Kays Engineering's TechniDrill 2.00-30-48 is a gundrilling machine used to manufacture airplane aileron actuation cylinders. The actuation cylinder starts as a solid bar. The gundrilling machine drills the large primary hole in a single pass, without the need for a pilot hole. Secondary processes are then utilized to finish the cylinder.

The TechniDrill 2.00-30-48 has a gundrilling diameter capacity of 2.0 inches (50.8 mm) and a maximum gundrilling depth of 48 inches (1219 mm). It features a 30 horsepower AC spindle motor and two-speed gearbox to provide versatile gundrilling performance.

The workpiece is counter-rotated during gundrilling via pneumatically operated 3-jaw chucks, which increases the accuracy of the drilled hole.

TechniDrill gundrilling machines are designed and manufactured by Kays Engineering in Marshall, Missouri, USA.

Want more information? Click below.

Kays Engineering

Rate this article

[TechniDrill Gundrilling Machine Perfect for Aerospace Applications]

Very interesting, with information I can use
Interesting, with information I may use
Interesting, but not applicable to my operation
Not interesting or inaccurate

E-mail Address (required):

Comments:

Type the number:

Copyright © 2024 by Nelson Publishing, Inc. All rights reserved. Reproduction Prohibited.
View our terms of use and privacy policy